Tungsten carbide burs crosscut and conical. To trim all thermoforming materials. Use at high revs (20 - 40 000 rpm), safety goggles.
Finishing set with 6 different instruments for the finishing of all thermoforming materials1 x Clean Cut Fissure bur for separating thicker materials (>1.0mm)2 x HSS Twist Drills for thinner mat..
Rightward cutting, left spiral, no lumps during cutting for rough cutting out of hard thermoforming foils and plates. Use at high revs (20 - 40 000 rpm), safety goggles.
Ideal for the local softening and polishing of Ekoflex-82, Erkoflex-95 and Erkoloc-pro materials.
Hot air burner without flame, no soot, no blackening.
Lisko-S polishing discs have a half open stabilised structure. To prepolish and smooth soft and hard thermoforming materials. The half open structure lasts at least 4 times longer than standard L..
Take-Off Pliers are designed to easily release hard thermoformed materials from the model.
As well as minimising possible damage to the appliance during removal these pliers save both tim..
Tungsten carbide bur, crosscut, pear-shaped.
Showing 1 to 7 of 7 (1 Pages)